Cisco VPN Client connecting to Checkpoint/Nokia Firewall
I've been directed to configure an internal user to connect outbound to a customer Checkpoint firewall using the MS VPN Client Port 1723/47. We currently use PAT to one global address for all outbound clients. That doesn't work for this issue. I had to static nat inside out and allow the GRE to the outside nat.
I'm looking for a more manageable and secure way to accomplish the task. I can't NAT 50 users to registered address space to connect to this VPN.
QUESTION: 1. Has anyone configured the Cisco VPN Client (4.7) to connect to a Checkpoint/Nokia Firewall? Is this supported by Checkpoint?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...