Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco VPN Client to PIX Connection.

Hello Everyone,

I am implementing VPN solution at work. I have PIX 515E for the VPN server and Client 4.0.2(b) for the VPN client. When I test from my house or some agencies, it works great. However, there are some agencies that staff can't connect to the PIX. The error message say "The remote peer is no longer responding." I am almost sure that it's firewall issue. So I am about to write some instruction for the agencies so that they can open up proper ports/protocols for our staff. When I sniff packets, I can see UDP/64514, UDP/500, and UDP/4500. What else should I ask for? How should I ask the agencies for the VPN client access to our PIX through their firewalls? Thank you,

  • Other Security Subjects
1 REPLY
New Member

Re: Cisco VPN Client to PIX Connection.

Hi,

You will also need IP protocol 50 or ESP.

Arthur

113
Views
0
Helpful
1
Replies
This widget could not be displayed.