When you configure the PIX, usually there is a new nat pool assoicated with the incoming VPN user. You can use this access control list to restrict the VPN user access. For example: the pool for the VPN user is 10.10.10.0/24 and the only server they can access is 192.168.10.1/32. The related command will be:
access-list 101 permit ip host 192.168.10.1 10.10.10.0 255.255.255.0
nat (inside) 0 access-list 101
You can also relay the user authentication to AAA server and create the dynamic access control list per user/group based.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...