Cisco Vpn with wireless connect but not receive bytes
I have a user that is using the Cisco vpn client v 4.05(b) at home with a Linksys wireless router/4 port switch combo BEFW11S4v4 with Firmware Version : 1.50.14. If he plugs the laptop into a port on the linksys the vpn client connect with no problem. He uses the wireless card, the vpn client negotiate and connect correctly, internet is ok but all that is has in vpn does not connect. I show statistic one has vpn I send bytes but I not receive any bytes. If disabling the other NIC Fast ethernet on the Laptop when using the wireless, it's work correctly . Does anyone have any ideas?
Re: Cisco Vpn with wireless connect but not receive bytes
Few of our Cisco VPN Client (most of them with Windows XP home edition) somehow get their primary ethernet port configured as 'bridging mode' and VPN works intermittently. As soon as the primary ethernet port is turn off from 'bridging' then Cisco VPN works.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...