Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Client unable to connect to 3015 Concentrator via PIX515UR...

Client Version 3.6.3.

When connection is started after a few seconds later I receive the message "User Authentication Application failed to start."

And on the concetrator the following message is logged.

"555 03/18/2003 15:11:32.480 SEV=5 IKE/50 RPT=20 192.168.2.1 Group [GenericGroup] Connection terminated for peer (Peer Terminate) Remote Proxy N/A, Local Proxy N/A"

What am I missing ? Thanks in advance.

  • Other Security Subjects
1 REPLY
Silver

Re: Client unable to connect to 3015 Concentrator via PIX515UR..

This is what I would recommend. Go ahead and uninstall the software again. You might want to check

out this link on manual uninstallation of the VPN client to make sure everything is wiped clean:

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2284/products_configuration_example09186a00

80094b7f.shtml

Then, go ahead and reinstall the 3.6.3 client. Make sure you don't have the firewall that's built

into WinXP activated if at all WinXP is the client.

89
Views
0
Helpful
1
Replies