Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

command different?

i wonder what different between clear configure and write erase.if they have same result.

thank you for help!

1 REPLY

Re: command different?

Take a look at his descriptions from the command reference:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ae.html#wp1027782

write erase = Clear the Flash memory configuration.

The following example erases the contents of Flash memory and reloads the PIX Firewall:

example:

write erase

Erase PIX configuration in Flash memory? [confirm] y

reload

Proceed with reload? [confirm] y

-------------------------

clear configure

Resets command parameters in the configuration to their default values.

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a6.html#wp1055799

configure

Configure from the terminal, Flash memory, the network, or factory default. The new configuration merges with the active configuration except for the factory default, in which case the active configuration is cleared first and then replaced by the factory default. The factory default option is available only on the PIX 501 and PIX 506/506E.

clear configure [terminal | memory]

clear configure [primary | secondary | all]

[no] configure http[s] :// [user:password@] location [ :port ] / http_pathname

configure net [[location]:[filename]]

clear configure primary | secondary | all

show configure

For the PIX 501 and PIX 506/506E only:

configure factory-default [inside_ip_address [address_mask]]

sincerely

Patrick

89
Views
0
Helpful
1
Replies
CreatePlease to create content