Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

communication between vpn users and lan not working

ciscoasa(config)# sh run

: Saved


ASA Version 8.0(2)


hostname ciscoasa

enable password xxx



interface Ethernet0/0

nameif outside

security-level 0

ip address ext_ip


interface Ethernet0/1

nameif inside

security-level 100

ip address


interface Ethernet0/2


no nameif

no security-level

no ip address


interface Ethernet0/3


no nameif

no security-level

no ip address


interface Management0/0

nameif management

security-level 100

ip address



passwd xxx

ftp mode passive

clock timezone mst -6

access-list split_tunnel_list standard permit

pager lines 24

logging enable

logging asdm informational

mtu management 1500

mtu outside 1500

mtu inside 1500

ip local pool vpnuserspool mask

no failover

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-602.bin

no asdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 1

route outside gw_ip

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout uauth 0:05:00 absolute

dynamic-access-policy-record DfltAccessPolicy

aaa authentication ssh console LOCAL

http server enable

http inside

http management

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac

crypto dynamic-map dyn1 1 set transform-set FirstSet

crypto dynamic-map dyn1 1 set reverse-route

crypto map mymap 1 ipsec-isakmp dynamic dyn1

crypto map mymap interface outside

crypto isakmp enable outside

crypto isakmp policy 1

authentication pre-share

encryption 3des

hash sha

group 2

lifetime 43200

no crypto isakmp nat-traversal

telnet timeout 5

ssh inside

ssh timeout 60

console timeout 0

dhcpd address management

dhcpd enable management


dhcpd address inside

dhcpd dns dns_1_ip dns_2_ip interface inside

dhcpd enable inside


threat-detection basic-threat

threat-detection statistics access-list


class-map inspection_default

match default-inspection-traffic



policy-map type inspect dns preset_dns_map


message-length maximum 512

policy-map global_policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp


service-policy global_policy global

ntp server source outside

group-policy vpnuserspolicy internal

group-policy vpnuserspolicy attributes

split-tunnel-policy tunnelspecified

split-tunnel-network-list value split_tunnel_list

address-pools value vpnuserspool

username admin password xxx encrypted privilege 15

username admin attributes

vpn-group-policy vpnuserspolicy

tunnel-group vpnusersgroup type remote-access

tunnel-group vpnusersgroup ipsec-attributes

pre-shared-key *

prompt hostname context


: end


New Member

Re: communication between vpn users and lan not working

I want to enable VPN users to access resources on the LAN and vice versa. I did this:

access-list inside_nat0_outbound extended permit ip

nat (inside) 0 access-list inside_nat0_outbound

Doesn't work. Any ideas?


Re: communication between vpn users and lan not working


crypto isakmp nat-traversal

New Member

Re: communication between vpn users and lan not working

perfect! thanks!

CreatePlease to create content