cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
371
Views
0
Helpful
4
Replies

Concentrator Web Admin Locked

don.cook
Level 1
Level 1

The web interface of my admin locked up just a litle bit ago. I was working on TFTP'ing some files and the admin stopped working. Right now I think connected users are okay, but I cannot start the admin or connect using the WebVPN. Any ideas? Thanks for your help, Don

4 Replies 4

Patrick Laidlaw
Level 4
Level 4

Don,

You'll probably have to wait for the system to either time out or you can go in through the console and disable and reenable the http web login.

From the main menu through console slect the following command:

Step1 --> 1) Configuration

Step2 --> 4) Management Protocols (Telnet, TFTP, FTP,etc.)

Step3 --> 2) Configure HTTP

Step4 --> 1) Enable/Disable HTTP

Patrick

Thank you for your reply! I tried the steps you laid out for me and, unfortunately, it didn't work. If you have any other ideas, I would apreciate it.

Thanks again,

Don

Don,

Sorry The only other option I can think of is to reboot the Concentrator maybe someone else might have soemthing for you.

Patrick

Thanks Patrick!

I wasn't sure what else to do either, so I had a chance to reboot this weekend and did - the web interface is back!

I appreciate your help! -Don

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: