We have 2 Cisco Concentrators, a 3005 and a 3015. Just bought the 3015 and want to use it as the main Concentrator instead of the 3005. Is it possible to TFTP the config file from the 3005 to a TFTP server and then TFTP that same config file to the 3015? Or would I need to tweak out some settings prior to uploading it to the 3015? Thanks in advance.
You can use the same config and load that on the 3015 aswell. The only thing to watch out for will be the IP addresses, make sure you change those before loading it on the 3015, but as far as the model difference goes it will not matter.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...