Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Config PIX to pass-through VPN Traffic

I've been trying to configure our PIX 506 IOS ver. 5.2(5) to pass-through vpn traffic to a 3rd party host. I had configured it using a static map and a conduit permitting port 1701 to pass through to the inside vpn host for authentication.

Prior to configuring the PIX I had tested the 3rd party VPN host and client communications and authentication with success. After setting up the PIX, VPN Host, and VPN Client I was able to ping the inside vpn host, but was unable to authenticate against it. Which led me to believe that some thing was wrong with the PIX config.

Can anyone suggest a configuration for this?

Thanks,

Nate

1 REPLY
Cisco Employee

Re: Config PIX to pass-through VPN Traffic

95
Views
0
Helpful
1
Replies