I don't know if this is the right forum regarding my concern but if it's not just point me to the correct list. Here is my concern ... how can I put configuration comments on my Cisco routers and switches ?
Please tell me also if this is applicable to all versions of Cisco IOSes.
Unfortunately, there is not a way to make the router store comments in the running config. You can use !to enter a commented line at anytime, but it is not saved.
You could comment your configs using ! on the TFTP/FTP server, and move it to startup. The running config would not have the comments but the startup would. Of course, this would only work until the next time you write mem.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...