Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Configuring Easy VPN Server on 1811

I'm trying to configure Easy VPN server on my 1811 router to allow remote users access to resources on our corporate network. I used the wizard to do the configuration for Easy VPN but when I test the VPN it fails at checking dependent components. It is telling me that AAA Authentication, Authorization, and Global Address Pool are all "not configured." I configured AAA through SDM under additional tasks, so I'm not sure where I am going wrong. Any help is greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Configuring Easy VPN Server on 1811

Brandon,

the below URL - provide just about all config examples for the 18xx series.

http://conft.com/en/US/products/ps5853/prod_configuration_examples_list.html

HTH.

2 REPLIES

Re: Configuring Easy VPN Server on 1811

Brandon,

the below URL - provide just about all config examples for the 18xx series.

http://conft.com/en/US/products/ps5853/prod_configuration_examples_list.html

HTH.

New Member

Re: Configuring Easy VPN Server on 1811

Thanks for you help. My problem was I was using the wrong group authentication for the EasyVPN. Working like a champ now!

586
Views
0
Helpful
2
Replies
CreatePlease to create content