I have a client which access a server through Exceed application which uses UDP port 177 and gets a reply from the server on UDP port 6000.How do i configure this through PIX firewall.The Client is on inside interface and the Server on DMZ.
ugh. There is no pretty solution. The pix does not have an application level proxy for exceed. You will need to disable nat between the clients and that particular server, and allow in all udp to the server's port 177 from the inside, and all udp in from the server's port 6000 in to the dmz int.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...