Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Configuring Multicasting on ASA5520

Hi,

I'm trying to allow multicast traffic on my Cisco ASA5520 and followed the sample configuration from this link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807631d2.shtml

Unfortunately, I'm getting this error from the logs:

Jul 09 2009 13:55:10: %ASA-3-106010: Deny inbound protocol 2 src outside:<RP IP address> dst identity:224.0.0.2

Would you know why this is happening?

Thanks,

Pat

4 REPLIES

Re: Configuring Multicasting on ASA5520

Protocol number 2 is IGMP, make sure you have enabled IGMP and Multicast Routing.

New Member

Re: Configuring Multicasting on ASA5520

Hi Andrew,

Thanks for your reply. Multicast routing is enabled on the FW via this command 'multicast-routing'. Is there a separate command to enable IGMP?

Thanks,

Pat

New Member

Re: Configuring Multicasting on ASA5520

Also, just to clarify, I'm trying to enable a PIM sparse mode with a single RP.

Thanks!

Re: Configuring Multicasting on ASA5520

OK - the original post included a deny on the firewall, 1 - it was the IGMP protocol, 2 - the desintation address was multicast all routers. What application are you trying to multicast thru the firewall?

915
Views
0
Helpful
4
Replies
CreatePlease to create content