Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Configuring PIX 501 with ISDN DialUp Connection

Hi,

I'd really appreciate if someone could help me with the following scenario:

I need to configure the PIX 501 to work in the following network setup

LAN ---> PIX 501 ---> Cisco 760 ISDN Router ---> Internet

The LAN I have is very small, having 11 users on Static IPs, with a WinNT 4 server (LAN's IP range is 192.168.0.x)

The internet connection is a 128Kbps DialUp connection.

We get a Dynamic IP address from the ISP everytime there is a new connection.

Would the PIX firewall work in such a setup? If yes, how do I set up the PIX 501? and do I need to change anything on the Cisco 760?

Thanks.....

1 REPLY
Bronze

Re: Configuring PIX 501 with ISDN DialUp Connection

A configuration along similar lines is available at the URL:

http://www.cisco.com/warp/public/779/smbiz/service/configs/700/700_isp_pat.htm

Simply put your PIX in place of the client shown. All clients behind the PIX could be translated by the PIX and then translated again by the 760. I haven't come accross such an implementation personally. You need to be sure of the security implications.

88
Views
0
Helpful
1
Replies
CreatePlease to create content