Configuring Zone Alarm to work with VPN Client 3000

bgmess · ‎01-15-2003

How do I configure my Zone Alarm to allow the VPN Client 3000 to access the network? Currently the Zone Alarm does not allow the VPN Client to go out through my DSL connection.

As a note, I am using the IPsecdialer.

Thanks.

Brian

raymong · ‎01-20-2003

To connect a vpn tunnel through a firewall you will need to open udp port 500, if the traffic is being PATed (ipsec through NAT) you will need to open udp port 10000 as well, then allow protocol's ESP(50) an AH(51) through.