Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

conn timeout 00:00:00 in version 6.2 destroying connections after 2 minutes

i´ve upgraded from a 5.3 version with comm timeout set to 00:00:00

(never expire). In version 6.2 with this command let the PIX have connections

(iddle or NOT ) only for 2 minutes. After this time the connection are destroyed.

I set the conn timeout to 168:00:00 (one week).

I ´ve changed the conn timeout to 00:00:00 in others PIX and the problem ocurs egain.

5 REPLIES
Cisco Employee

Re: conn timeout 00:00:00 in version 6.2 destroying connections

This is a known bug. The bug ID is: CSCdx35663

The workaround is as you have done. Set the timeout to be a very large value. The bug has been fixed and will be in PIX 6.2(2) due out at the end of the month.

Sincerely,

David.

Community Member

Re: conn timeout 00:00:00 in version 6.2 destroying connections

Do u have a failover configured and cables connected to both the firewalls?

Community Member

Re: conn timeout 00:00:00 in version 6.2 destroying connections

No failover is not configured

Cisco Employee

Re: conn timeout 00:00:00 in version 6.2 destroying connections

This is a known issue, which is fixed in PIX version 6.2(2) which should be out at the end of the week.

In the mean time, setting the connection timeout extremely high is a workaround.

Sincerely,

David.

Community Member

Re: conn timeout 00:00:00 in version 6.2 destroying connections

Thank you.

I´ve worked about this problem during many days to be shure of this. After a disaster recovery....and many pain.... we have now the oficial confirmation to

talk to my boss.

119
Views
0
Helpful
5
Replies
CreatePlease to create content