Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Connecting to a VPN server through our PIX 515 firewall

I'm using a PIX 515 running 6.2 IOS with 3 ports. I have a W2K VPN Server in the DMZ interface that I would like to our W2K client to conntect to. Is this possible? If this is possible what do I have to do? I have setup a vpn connection using to PIX but I was wondering about the other setup.

3 REPLIES
New Member

Re: Connecting to a VPN server through our PIX 515 firewall

Microsoft VPN is PPTP protocol using TCP port 1723 and protocol GRE.

Make sure you static translate the w2k server from DMZ to outside public ip address and open those ports.

x.x.x.x is the translated ip address (public) , y.y.y.y is the W2k server in the DMZ.

static (dmz, outside) x.x.x.x y.y.y.y

conduit permit tcp host x.x.x.x eq 1723 any

conduit permit gre host x.x.x.x any

Best Regards,

New Member

Re: Connecting to a VPN server through our PIX 515 firewall

What If I wanted to use L2tp/Ipsec?

Cisco Employee

Re: Connecting to a VPN server through our PIX 515 firewall

You can do that as well but, it would be easier to make use of the Cisco vpn client 3.x.

For details of thins you can do, try this site:

http://www.cisco.com/warp/public/707/index.shtml#pix

Regards,

88
Views
0
Helpful
3
Replies