Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Console Telnet Access Authentication

I have a PIX 515E. I've set it up so that console telnet access is authenticated by TATACS+ ( Cisco ACS ). How can I further set it up so that if the TACACS+ server is not available, It will resort back to Pix's local authentication (Username and password defined by "username" command on PIX)?

Thanx

1 REPLY
Cisco Employee

Re: Console Telnet Access Authentication

Gaining Access when the AAA Server is Down

If the AAA server is down, you can access the PIX by entering the Telnet password initially, then pix for the username, and then the enable password (enable password whatever) for the password. If enable password whatever is not in the PIX configuration, enter pix for the username and press Enter. If the enable password is set but not known, you will need a password recovery disk to reset the password.

http://www.cisco.com/warp/public/110/authtopix.shtml#H

Password Recovery and AAA Configuration Recovery Procedure

http://www.cisco.com/warp/public/110/34.shtml

Hope that helps.

R/Yusuf

77
Views
0
Helpful
1
Replies
CreatePlease login to create content