Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Context Problem in the ASA 5510

Hi, This is Ridhwan. Regarding ASA 5510 I created context.

example c1 and c2 and I added all interface to inside the context (c1, c2).

but I can't get security level command and nameif, vlan. I tryed all command but not coming i am using ver 7.2.

example....

Rack01ASA1(config)#hostname Rack01ASA1

Rack01ASA1(config)# mode multiple

Security context mode: multiple

Rack01ASA1(config)# admin-context admin

Creating context 'admin'... Done. (4)

Rack01ASA1(config)# context admin

Rack01ASA1(config-ctx)# config-url flash:/admin.cfg

WARNING: Could not fetch the URL flash:/admin.cfg

INFO: Creating context with default config

INFO: Admin context will take some time to come up .... please wait.

Rack01ASA1(config-ctx)# context c1

Creating context 'c1'... Done. (5)

Rack01ASA1(config-ctx)# config-url flash:/c1.cfg

WARNING: Could not fetch the URL flash:/c1.cfg

INFO: Creating context with default config

Rack01ASA1(config-ctx)# allocate-interface e0.2

Rack01ASA1(config-ctx)# allocate-interface e0.4

Rack01ASA1(config-ctx)# allocate-interface e0.3

Rack01ASA1(config-ctx)# config-url flash:/c2.cfg

WARNING: Could not fetch the URL flash:/c2.cfg

Rack01ASA1(config-ctx)# allocate-interface eth0.5

Rack01ASA1(config-ctx)# allocate-interface eth0.4

After that I can't go inside the contect c1 or c2

I can go to inside the inderface (eth0.4 or eth0.5) but i can't get this this command (nameif, vlan,security level)

so please advice me.

Thank u so much

Bye

Ridhwan

1 REPLY
New Member

Re: Context Problem in the ASA 5510

the vlan assignment you should do on the system context for each sub interface.

"After that I can't go inside the contect c1 or c2"

Does it give you an error message when you try to enter into the created context with

changeto context c1 command ?

check this link:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml

153
Views
0
Helpful
1
Replies
CreatePlease to create content