Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Conversion concentrator to PIX - long

How would I conver the following into "pix language"

inheritance=1

authprotocol=2

authalgorithm=2

authkeysize=128

encrprotocol=2

encralgorithm=4

encrkeysize=168

compression=2

lifetimemode=1

lifetimekbytes=10000

lifetimeseconds=28800

gatewayaddress=

ikephase1mode=2

ikeauthmode=1

ikeauthalgorithm=2

ikeencralgorithm=2

ikelifetimemode=1

ikelifetimekbytes=10000

ikelifetimeseconds=86400

ikecerthandle=0

ikecertpathenab=1

ikedhgroup=2

ipsecencapmode=2

pfsdhgroup=1

replayprotection=2

ikeproposal=1

Is there anything else I require for the tunnel

1 REPLY
New Member

Re: Conversion concentrator to PIX - long

Seems that you are trying to configure a VPN tunnel between a Concentrator and a PIX. Well, to learn how to do that, the best place would be to see the PIX support page. The same can be reached by going to Cisco.com-> Technical Support -> Hardware Support -> Security & VPN Devices -> PIX 500 Series Firewalls. See the Software Configuration section. It has a number of documents dealing with the subject of setting up VPN tunnels between PIX and the VPN Concentrator.

108
Views
0
Helpful
1
Replies
CreatePlease to create content