Could we add a fully meshed config example to www.cisco.com?

[tmittelstaedt]

Hi!

I'm working on a large VPN and I'm looking

for an example of 2 IPSec vpn's terminating into an IOS-based router. (in this case, a 804 but the answer is general to any 56-bit or above IOS)

Cisco has a very nice config for the PIX, located at

http://www.cisco.com/warp/public/110/pixmeshed.html

that shows multiple VPN's terminated into the PIX.

Cisco also has a very nice config for a 56bit IOS for a single VPN IOS-based IPSec router, located at:

http://www.cisco.com/warp/public/110/39.html

Both of these have been useful to me so far and I appreciate their existence.

But what I need is an example config of a 56bit IOS based router, like the one pictured in the second URL, that shows 2 VPN's coming into the router.

Thanks!

[paqiu]

We do have routers fully meshed IPSEC VPN sample config:

http://www.cisco.com/warp/customer/707/ios_meshed.html

Even better, fully meched VPN with NAT translation as well:

http://www.cisco.com/warp/customer/707/30.html

[m.mimouni]

Hi

Here is an example of routers : http://www.cisco.com/warp/public/707/ios_hub_spoke2.html

Mohammed

Regards