Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Creating VPDN on PIX firewall

Hello Sir,

I have 1 PIX 520-DC, now i want to creat 1 VPN. my remote site engineers wants to connect or use my corporate services. I have some knowledge about VPN so i can creat it with 2 methodes 1 with Cisco VPN client and 2 with PPTP and L2TP, but i dont know how to configure my PIX for that i want to use local user database for authentication

so please give me some good configuration for both methods,

Thx,

Chirag Pandya

2 REPLIES
Gold

Re: Creating VPDN on PIX firewall

Chirag,

The following documents will help, please choose the most apporiate for your use:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093f89.shtml

or

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

or

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml

For authentication for your client(s), I would suggest that you use RADIUS or TACACS+

Hope this helps, if you need further help please do let me know. Please rate post if this reply helps you.

Jay

New Member

Re: Creating VPDN on PIX firewall

Hello Sir ,

Thx for the replay. i want need some more configuration of Remote access vpn and site-to-site in more depth.

Thx

Chirag Pandya

96
Views
0
Helpful
2
Replies