Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cross interface communication

current config:

nameif ethernet0 outside security0

nameif ethernet1 inside security100

nameif ethernet2 vpn01 security10

nameif ethernet3 surveys01 security15

nameif ethernet4 global01 security75

nameif ethernet5 available01 security25

i want to know what i need to do to allow communication between all of these interfaces. all servers on all interfaces need to be able to access every server on global01, inside, and surveys01 interfaces. I have an internal DNS server that all of the servers are commonly connected to via a switch and NIC3 on each server. So they all can access a common zone file. I know I had major problems in the past and the alias command just didn't cut it.

THanks well in advance,

New Member

Re: cross interface communication

in additon i set up static translations for all interfaces and the outside such as

static (inside,outside) internal external mask

static(vpn01,outside) internal external mask


so far i've only done static translations from each interface to the outside interface.....