Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSCds19881. How to checkout ?

How can i check out wether my pix 515 has this

bug or not before putting it into production ?

Unfortunately a few words in bug navigator

tell that "New units from Cisco mfg and Cisco Service

have this problem resolved".

I'd like no know if i've got a "new" one.

We bought it in October 2001:

thewall> sh version

Cisco PIX Firewall Version 6.1(1)

Cisco PIX Device Manager Version 1.0(2)

Compiled on Tue 11-Sep-01 07:45 by morlee

thewall up 10 days 22 hours

Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0005.328f.8908, irq 11

1: ethernet1: address is 0005.328f.8909, irq 10

2: ethernet2: address is 00e0.b604.1541, irq 9

3: ethernet3: address is 00e0.b604.1540, irq 9

4: ethernet4: address is 00e0.b604.153f, irq 9

5: ethernet5: address is 00e0.b604.153e, irq 9

Licensed Features:

Failover: Enabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 6

Cut-through Proxy: Enabled

Guards: Enabled

Websense: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

ISAKMP peers: Unlimited


Re: CSCds19881. How to checkout ?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center ( or speak with a TAC engineer. You can open a TAC case online at

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

CreatePlease login to create content