I discovered policies from a couple 7200 routers and Cisco Security Manager recommended several changes, but when deployed it deployed different ones (No additional modifications were done. Just discovery and immediate deployment). For example it removed some lines (ip route-cache flow, and access lists) without adding equivalent ones, and didnt respect what the preview file showed it would deploy.
It looks like an ugly bug. I have tested it with several 7200 routers, and the preview shows the configuration modifications completely inaccurately. For example, changes meant to interface 1/0 are shown under interface 2/0.290 etc. All the configs look really messed, and deployed differently.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...