I have a 5520 as a Remote Access and L2L HUB and spoke VPN concentrator. I also have a wireless DMZ that terminates VPN tunnels. When i go to discover my hub an spoke VPN topology it wont discover because the crypto map is applied to multiple interfaces...how can i over ride this?
This document describes how to configure Dynamic Multipoint VPN (DMVPN) and Easy VPN with Xauth on the same router. This setup caters for DMVPN spokes to be dynamically addressed. Internet Security Association and Key Management Protocol (ISAKMP) profiles provide the ability to separate the authentication methods of dynamically addressed DMVPN spokes or Easy VPN Clients.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...