A problem has been identified in CSPM 2.3.1i which involves changes made to sensor nodes. A fix is currently being tested and will be available shortly. There is a temporary work around that should work for you. Here are the steps.
1) Delete the sensor nodes that you modified from the network topology.
2) Rebuild the nodes using the add sensor wizard.
3) Make all the necessary changes to each of the node's properties panels before pressing save or update.
4) Once all of the nodes data is correct, press save or update.
The problem involves changes that are not being stored correctly in the database. If you make all of your changes to a new node before pressing save or update, the data is stored correctly.
If you need to further modify a sensor in the future, you should follow the steps again.
Once testing is finished, CSPM 2.3.2i will be made available. This version will fix the problem.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...