I have had a number of users complaining about problems getting their CVPN 3.1 client to work with their Pac Bell DSL and its PPPoE client. Anyone have any wisdom to share on this? One person was not able to see any adapters in the "Set MTU" utility having uninstalled 2.5.2 and installed 3.1. Another person could connect to our 3030 concentrator and could do some pings on our intranet but could not run any applications - do anything which required a heftier data stream. We had him set MTU to 1400 and this didn't help. He's running NT. In most other environments the CVPN clients are running well.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...