Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

debug crypto isakmp on ASA

Folks,

I have an ASA and would like to see why my ipsec tunnel is not coming up.

I enable logging. and then type in "debug crypto isakmp", but see nothing, in old pix could, it was so easy to troubleshoot but with 7.x code is there a good command to see debug output?

3 REPLIES

Re: debug crypto isakmp on ASA

Hi Navin

try

debug crypto isakmp 50

Also using syslogs is really useful. You know ASDM has one built-in. Set the loggig level to notifications

Regards

Re: debug crypto isakmp on ASA

if doing the debug from telnet session you need to enable terminal monitor, try this.

ciscoasa#terminal monitor

then use your debug , to disable it issue terminal no monitor

HTH

Jorge

New Member

Re: debug crypto isakmp on ASA

Quick trick, since debug can run away on you making it hard to enter commands. do this enter the NO version of the command first then enter the command like.

no debug crypto isa

debug crypto isa

that way if it takes off all you do is hit up arrow once and return to end the command.

17462
Views
3
Helpful
3
Replies