Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Destination address translation on PIX

How do I translate the Destination IP address on PIX?

For eg: I initiate a ftp session from one of the host from the inside interface to a destination IP address through a tunnel. I need to translate the destination address .

2 REPLIES
New Member

Re: Destination address translation on PIX

Apply this command to the pix:

static (outside,inside) nated_inside_ip real_outside_ip netmask 255.255.255.255

So the prompt command would be "ftp nated_inside_ip"

This works for version 7.x. I did not have a chance to experiment this with a previous version.

New Member

Re: Destination address translation on PIX

Thanks....it works...!

99
Views
0
Helpful
2
Replies
CreatePlease to create content