Is it possible to configure NAS (on NAM perhaps) to assign IP addresses to clients on the trusted side - i. e. to act as a DHCP server for the trusted side subnets or change the address through the NAC Agent after the posture assessment is over?
I'm assuming from the question that this is an OOB setup. If so, the agent requests a new IP if you're using Role-Based VLANs with VGW. In OOB RIP setups, it will also request a new IP when it gets on the final VLAN.
CAS giving out IP addresses on the trusted subnets would not be possible, or even a good idea!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...