Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP Relay Over IPSEC VPN between a PIX and VPN Concentrator

Dear all,

I am having problems getting DHCP relay working at a remote site

At the Main site i have a Windows 2003 DHCP Server behind a VPN Concentrator 3005

At the remote site i have a Cico PIX 501.

The VPN is workings correctly and can ping from both ends.

Unfortunately no matter what config i put into the Pix i can't get it to relay to the clients.

the config i have tried on the clients is..

dhcprelay server 192.168.1.1 outside

dhcprelay enable inside

dhcprelay setroute inside

and

dhcprelay server Outside_IP outside

dhcprelay enable inside

dhcprelay setroute inside

and also have included tried both with the following lines in the access lists

access-list inside_nat0_outbound permit ip Outside_IP 255.255.255.255 192.168.1.0 255.255.255.0

access-list outside_cryptomap_10 permit ip Outside_IP 255.255.255.255 192.168.1.0 255.255.255.0

Can anyone help?

Thanks

James

1 REPLY
Bronze

Re: DHCP Relay Over IPSEC VPN between a PIX and VPN Concentrator

Refer to PIX/ASA 7.x as a DHCP Relay Configuration Example for more information

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008075fcfb.shtml

868
Views
0
Helpful
1
Replies