Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DHCP Snooping without DHCP Relay configured

Hi,

we've are using with success DHCP Snooping with DHCP relay configured...but I was wondering if the DHCP Snooping feature is working also on a L2 network (composed by different switches) where the DHCP Server is on the same VLAN as the client?

I know that Server have to be in a dedicated VLAN but VLAN segmentation DHCP Server - client is planned in a second step...

Thanks for your suggestions!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: DHCP Snooping without DHCP Relay configured

Hi Omar,

The DHCP server can be on the same VLAN as the clients, no problem with this.

You need to configure the DHCP server's port as trusted with the following commands:

conf t

ip dhcp snooping

ip dhcp snooping vlan x

interface fastethernet x/y

ip dhcp snooping trust

fastethernet x/y will be the port where the DHCP server should be located.

Cheers:

Istvan

2 REPLIES

Re: DHCP Snooping without DHCP Relay configured

Hi Omar,

The DHCP server can be on the same VLAN as the clients, no problem with this.

You need to configure the DHCP server's port as trusted with the following commands:

conf t

ip dhcp snooping

ip dhcp snooping vlan x

interface fastethernet x/y

ip dhcp snooping trust

fastethernet x/y will be the port where the DHCP server should be located.

Cheers:

Istvan

New Member

Re: DHCP Snooping without DHCP Relay configured

Mr. Istvan,

I want to ask what if for examplre, there is this layer 3 4506-e switch acting as a dhcp server for two vlans. vlan 5 and 6. and it configured to have two different default router for this two vlans respectively. how can i configure it?

350
Views
0
Helpful
2
Replies