Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DHCP snooping

Hi to All,

I have multiple VLANs configured on a L2/L3 switch (cisco 3750) and one DHCP server configured on wan [using ip helper-address on the switch I forward the DHCP request on a L3 interface.

It' s possible / How can I enable dhcp snooping on the switch ?

It's possible / How can I configure the TRUSTED PORT (the port vs the DHCP server)

FOLLOWING THE CONFIGURATION:

SWITCH

!

!

interface GigabitEthernet1/0/1

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/2

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/3

description ** DHCP pc 192.168.2.0/24 **

switchport access vlan 2

switchport mode access

load-interval 30

!

interface GigabitEthernet1/0/24

description ** TO WAN ROUTER **

no switchport

ip address 192.168.254.254 255.255.255.252

!

!

interface Vlan2

description ** LAN **

ip address 192.168.2.254 255.255.255.0

ip helper-address 192.168.1.254

!

ip forward-protocol udp bootpc

!

IF I TRY TO CONFIGURE THE DHCP SNOOPING I CAN'T CONFIGURE THE TRUST PORT (on the "wan" interface):

SWITCH#conf t

SWITCH(config)#ip dhcp snooping vlan 2

SWITCH(config)#

SWITCH(config)#

SWITCH(config)#interface GigabitEthernet1/0/24

SWITCH(config-if)#ip dhcp ?

client DHCP client configuration

limit Limit DHCP Lease

relay DHCP relay configuration parameters

server Configure DHCP server behavior

1 REPLY
New Member

Re: DHCP snooping

332
Views
0
Helpful
1
Replies