I have a LAN to LAN tunnel up between a Cisco 3005 & 3015. I want workstations connected to the private interface of the 3005 to get IP addresses by DHCP from a DHCP server on the network the private interface of the 3015 is connected to. Can I do this? If so, how please? Many thanks.
There is a feature called "DHCP Relay" on the VPN3000 but this is only for DHCP requests between interface and not across IPSEC Tunnels. Also, the DHCP client should be on the side of the VPN3000's public or external interface and the DHCP server behind its private interface.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...