03-18-2004 06:21 AM - edited 03-09-2019 06:47 AM
Hi,
My question is:
Is it possible to have diferent CBCA rules on the same asynchronous interface (modem), one for access calls and one for dial-in calls, controling them using Dialer profiles. One for access and one for DDR.
If it's possible, PLS, some hints.
Thanks
Solved! Go to Solution.
03-24-2004 07:07 AM
I am not sure if what you are trying is possible. However, it is possible to apply the CBAC inspection rules to a dialer profile. You could refer to the section 'Remote Office to ISP Configuration' in the document at http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5/iosfw2/iosfw2_2.htm#13057.
03-24-2004 07:07 AM
I am not sure if what you are trying is possible. However, it is possible to apply the CBAC inspection rules to a dialer profile. You could refer to the section 'Remote Office to ISP Configuration' in the document at http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5/iosfw2/iosfw2_2.htm#13057.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide