Disabling NAT

[aksher]

What is method for disabling NAT on FWSM and use ASDM. For high level to low level access and vice versa.

[Collin Clark]

access-list extended NoNAT permit 192.168.1.0 255.255.255.0 10.10.10.0 255.255.255.0

nat (inside) 0 access-list NoNAT

This would disable NAT for traffic sourcing from 192.168.10/24 going to 10.10.10.0/24. The key is the 0 after (inside).

It's much easier to enable/disable NAT via CLI.

Here's a link that might help as well. http://cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091cb9.shtml

HTH and please rate.

[aksher]

I need the procedure to do it on ASDM and reducing lines on FWSM. Could any one explain on this?

[jwjorgensen]

What version of software are you running on the FWSM? I believe on version 3.1 you can disable nat control where you do not have to configure nat.