Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

kvc
New Member

Disabling SSH

Hi,

I have a 1751 router with SSH feature set.

There is a default command as "ip ssh-timeout 120".

I am using this router for isdn dial-out. The call is getting disconnected at exactly 120 seconds. I increased the idle timeout but still no change.

So i felt that maybe the call is disconnecting because of the above command.

Can anyone pls tell me how to disable this command.

Thank you

1 REPLY
Cisco Employee

Re: Disabling SSH

"no" in front of that command will remove it as documented at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/fothercr/srfssh.htm#xtocid2

I don't think that the isdn line is disconnected because of that command..Just configure the idle-timeout correctly as documented in following url

http://www.cisco.com/warp/public/471/idle_timeout.html

Make sure that its applied and get reset back to maximum once the interesting traffic is passed over the ddr link..

279
Views
0
Helpful
1
Replies