I have a router config (remote site) that contains a static route that I want to redistribute into eigrp (coming back to the host site), how do I make sure that that route goes through the VPN tunnel I have set up.
If you don't want to do that, then just configure a standard IPSec tunnel, but make sure that the crypto ACL on the head-end router includes traffic going to the remote static network. Then configure Reverse Route Injection on the head-end router, and it'll advertise both remote networks out to the head-end network.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...