I am setting up a DMVPN-solution. 2 Hubs (primary/backup) at the main site, connected to the same mGRE tunnel "cloud".
When setting up the spokes, I first configure basic internet-access, NAT and such. Before doing any DMVPN-config I can from inside reach internet. However, as soon as I configure DMVPN (SDM DMVPN Wizard) I loose internet connectivity from LAN.
I guess that the DMVPN wizard configures the router to tunnel everything. Am I right? I am not interrested in tunneling outgoing internet-traffic, only traffic from my Spoke LAN to a few LAN:s behind my DMVPN-Hub.
Is there any way to specify that only traffic from XXX to YY should enter the GRE tunnel?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...