do you telnet to a ASA's public or private IP address?
The the light on the branch office ASA5505 VPN is green. We can ping the public IP. We are not able to start a telnet session on the ASA's public IP "Could not open connection to the host, on port 23: Connect failed". Telneting to the ASA's private IP is a no-go--blank screen on the command line interface. The branch office with the ASA has access to internet. The branch office has access to email server in central office.
1. Do we telnet to private IP or public IP?
Any suggestions to remotely acces the ASA would be appreciated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...