I have to set up a site-to-site vpn between the 2 mentioned deices (and their networks behind).
But I have not found any decent docs on how to set this config up. I have found many, also the "software config manual" for the 800series, but its all confusing because they use all kinds of config-parameters and ip-addresses and dont describe vwhat they are for (f.ex. do they describe how to set it up and they show a config example - but these 2 use different ip-addresses !! - That really makes it hard to understand!!)
So, does someone here have a config that would fit here and post his config of the ASA and the 857 ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...