Re: Does Disabling Access Lists on the PIX Firewall Block All Tr
If you are going from a higher security level to a lower security level, all connections are allowed as long as there is an xlate. So from the inside of the PIX, if there is no outbound access-list, then all traffic will flow. If you do not want all IP traffic to get out to the other interface then you will need to build outbound access-lists.
If you are going from a lower security level to a higher security level, you need to have a conduit or an access-list command to permit the traffic. If not, the traffic will be blocked.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...