Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

dot1x authentication failed

I have a 3550 switch with IOS 12.2.I have configured a single port fa/26 to authenticate via my radius server .for my switch when i give a test it works fine.

'osi_switch#test aaa group radius server 172.25.25.50 deepa 01deepa01 legacy

Attempting authentication test to server-group radius using radius

User was successfully authenticated.'

But my system is not getting authenticated using the same login.below is my switch configuration

On the pc i have enabled md5 authentication on lan connection properties.

Any help will be highly appreciated.

1 REPLY
Silver

Re: dot1x authentication failed

If the switch passes the authentication test this means that config in switch is fine. Try using a different PC on the same interface and check if this work fine.

228
Views
0
Helpful
1
Replies
CreatePlease to create content