dot1x (Switch) Question with MAC bypass & Web Auth
Is it possible to configure dot1x with MAC Auth bypass along with web authentication?
The goal is to first try dot1x
If machine doesn't support dot1x, then use MAC address. If MAC isn't in list, redirect through a web browser.
From what I read, it sounds like MAC bypass gives me half of what I need and using web auth as a fall back to dot1x gives me the other half. Can these be using in conjunction to accomplish what is needed here?
There is also Web Auth with Automatic MAC Check, but there is mention of this only working in "web auth standalone mode." Can anyone comment on this?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...