Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Dual ISP Design Question

Does anyone have a configuration that shows a two router, two PIX configuration for a network that is used for traffic for internal networks being policy routed to either PIX for internet access.

If from the subnet, set next hop private interface PIX A, if from the other subnet, set next hop to private interface PIX B, and so on?

  • Other Security Subjects

Re: Dual ISP Design Question

Often times advanced configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit and to open a case with one of our TAC engineers, visit

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

New Member

Re: Dual ISP Design Question


I have done something almost exactly like what you are trying to do. The difference is that we policy routed based on application and not source IP. The only difference is in the access list that is used for the route map. If you would like to talk about it off line, drop me an email.