05-22-2002 07:33 PM - edited 03-08-2019 10:43 PM
Does anyone have a configuration that shows a two router, two PIX configuration for a network that is used for traffic for internal networks being policy routed to either PIX for internet access.
If from the subnet, set next hop private interface PIX A, if from the other subnet, set next hop to private interface PIX B, and so on?
05-29-2002 09:30 AM
Often times advanced configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, its often difficult to do so for this type of issue.
To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
05-31-2002 11:58 AM
Patrick,
I have done something almost exactly like what you are trying to do. The difference is that we policy routed based on application and not source IP. The only difference is in the access list that is used for the route map. If you would like to talk about it off line, drop me an email.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide