I've setup a test with dynamic filters on acs 3.1 with radius attributes and a test with pix acls. both test didn't work with my vpn concentrator sw ver. 4.01. I checked the "Monitoring | Dynamic Filters Screen" for the dynamic filter, but it didn't show up either. I did the setup all as explained on the cco.
Do you have any experiences with dynmaic filters on vpn concentrator?
Hi, you need to configure the Dynamic Filters on your ACS server only while the configuration on the VPN Concentrator will remain static. You do not need to change the configuration on the concentrator.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...