Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dynamic VTI help needed!

Hi all,

I currently have an "ordinary" site-to-site VPN with static crypto maps at the spokes and a dynamic crypto map at the headend.

What I'd like to do is replace this with static VTIs at the spokes and a dynamic VTI at the headend. I don't need any of the "flash" of DMVPN, just as straight a swap as I can possibly get.

The static VTIs are no problem, but I'm really confused about how to set up the dynamic VTI at the headend. I don't see how the DVTI gets associated with an interface, and which IP address the spoke should use to initiate the tunnel.

Could anybody please post a simple (but complete) config for a DVTI hub and a SVTI spoke?

many thanks,


New Member

Re: Dynamic VTI help needed!

Configuring the Cisco IOS? Server Load Balancer (SLB) feature to distribute large numbers of IP Security (IPsec) tunnels onto a Cisco 7200/7301 IPsec server farm. The server farm hubs are configured with dynamic Virtual Tunnel Interface (VTI) while the remote spokes can be configured using VTI or crypto maps (supporting single proxy).

New Member

Re: Dynamic VTI help needed!

Thanks, I'll try it out!


CreatePlease login to create content